Loading...
GPON ONT | OP152WV-RF

ZISA OP152WV-RF

1GE+1FE+WIFI+CATV+1POTs XPON ONU

  •    1G1F+WIFI+CATV+POTs is designed as HGU (Home Gateway Unit) in deferent FTTH solutions; the carrier-class FTTH application provides data service access.
  •    1G1F+WIFI+CATV+POTs are based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
  •    1G1F+WIFI+CATV+POTs adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.
  •    1G1F+WIFI+CATV+POTs are compliant with IEEE802.11n STD, adopts with 2x2 MIMO, the highest rate up to 300Mbps.
  •    1G1F+WIFI+CATV+POTsarefullycompliantwithtechnical regulations such as ITU-T G.984.xand IEEE802.3ah.
  •    1G1F+WIFI+CATV+POTs are designed by Realtek chipset 9602C.



Feature

  •    Supports Dual Mode (can access GPON/EPONOLT).
  •    Supports GPON G.984/G.988 standardsand IEEE802.3ah.
  •    Support CATV interface for Video Service and remote control by Major OLT
  •    Support SIP Protocol for VoIP Service
  •    Integrated line testing compliant with GR-909 on POTS
  •    Support 802.11n WIFI (2x2 MIMO) function
  •    Support NAT, Firewall function.
  •    Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
  •    Support port mode of VLAN configuration
  •    Support LAN IP and DHCP Server configuration
  •    Support TR069 Remote Configuration and WEB Management
  •    Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode
  •    Support IPv4/IPv6dual stack
  •    Support IGMP transparent/snooping/proxy
  •    In compliant with IEEE802.3ah standard
  •    Compatible with popular OLT(HW, ZTE, FiberHome...)


Product Specifications

Technical Item

Details

PON interface

1 G/EPON port(EPON PX20+ and GPON Class B+)

Upstream: 1310nm; Downstream: 1490nm

SC/APC connector

Receiving sensitivity: ≤-27dBm

Transmitting optical power: 0~+4dBm

Transmission distance: 20KM

LAN interface

1x10/100/1000Mbps and 1x10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector

WIFI Interface

Compliant with IEEE802.11b/g/n

Operating frequency: 2.400-2.4835GHz

support MIMO, rate up to 300Mbps

2T2R,2 external antenna 5dBi

Support: Multiple SSID

Channel:13

Modulation type: DSSSCCK and OFDM

Encoding scheme: BPSKQPSK16QAM and 64QAM

CATV Interface

RF, optical power : +2~-18dBm

Optical reflection loss: ≥45dB

Optical receiving wavelength: 1550±10nm

RF frequency range: 47~1000MHz,  RF output impedance: 75Ω

RF output level: ≥ 82dBuV-7dBm optical input

AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm

MER: ≥32dB(-14dBm optical input), 35(-10dBm)

POTS Port

RJ11

Max 1km distance

Balanced Ring, 50V RMS

LED

10 LED, For Status of WIFIWPSPWRLOSPONLAN1~LAN2 WORNNORMAL(CATV), FXS

Push-Button

4, for Function of Power on/off, Reset, WPS, WIFI

Operating condition

Temperature : 0+50

Humidity :10%90%non-condensing

Storing Condition

Temperature : -40+60

Humidity :10%90%non-condensing

Power supply

DC 12V/1A

Power Consumption

<6W

Net Weight

<0.4kg


Panel lights and Introduction

PilotLamp

Status

Description

WIFI

On

The WIFI interface is up.

Blink

The WIFI interface is sending or/and receiving data (ACT).

Off

The WIFI interface is down.

WPS

Blink

The WIFI interface is securely establishing a connection.

Off

The WIFI interface does not establish a secure connection.

PWR

On

The device is powered up.

Off

The device is powered down.

LOS

Blink

The device doses not receive optical signals or with low signals.

Off

The device has received optical signal.

PON

On

The device has registered to the PON system.

Blink

The device is registering the PON system.

Off

The device registration is incorrect.

LAN1~LAN2

On

Port (LANx) is connected properly (LINK).

Blink

Port (LANx) is sending or/and receiving data (ACT).

Off

Port (LANx) connection exception or not connected.

FXS

On

Telephone has registered to the SIP Server.

Blink

Telephone has registered and data transmission (ACT).

Off

Telephone registration is incorrect.

WORN

(CATV)

On

Input optical power is higher than 2dBm or lower than -18dBm

Off

Input optical power is between -18dBm and 2dBm

Normal

(CATV)

On

Input optical power is between -18dBm and 2dBm

Off

Input optical power is higher than 2dBm or lower than -18dBm

 

Ordering information

Product Name

Product Model

Descriptions

1G1F+WIFI+CATV+POTs XPON

OP152WV-RF

1*10/100/1000M and 1*10/100M Ethernet interface, 1 GPON interface, 1 POTS interface, 1 RF interface, built-in FWDM, support Wi-Fi function, Plastic casing, external power supply adapter




Product name?nbsp;    *
name?nbsp;    *
mobile?nbsp;    
tel?nbsp;  
Country?nbsp;    
Email?nbsp;   *
Address?nbsp;  
Content?nbsp;    *
      
Online