ZISA | Excellent Fiber Since 2004

1GE GPON ONT | OP151

1GE XPON ONU

1GE ONU is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access.

1GE ONU is based on mature and stable, cost-effective XPON technology. It can switch auto matic all with EPON and GPON mode when it access to the EPON OLT or GPON OLT.

1GE adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.

1GE is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.

1GE is designed by Realtek chipset 9601D

Feature

Supports Dual Mode (can access GPON/EPONOLT).
Supports SFU and HGU of EPON CTC 3.0 standard.
Support NAT, Firewall function.
Support Flow & Storm Control , Loop Detection and Port Forwarding.
Support port mode of VLAN configuration
Support LAN IP and DHCP Server configuration
Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode
Support IPv4/IPv6dual stack
Support IGMP transparent/snooping/proxy
In compliant with ITU-T G.984.x and IEEE802.3ah standard
Compatible with popular OLT (HW, ZTE, FiberHome,Vsol...)

Product Specifications

Technical Item	Details
PON interface	1 GPON/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm, Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM
LAN interface	10/100/1000Mbps auto adaptive Ethernet interfaces. 10/100/1000M Full/Half, RJ45 connector
LED	4 LED, For Status of POWER, LOS, PON, LAN
Push-Button	2, for Function of Power on/off, Reset
Operating condition	Temperature : 0℃～50℃ Humidity :10%～90%（non-condensing）
Storing Condition	Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing）
Power supply	DC 12V/1A
Power Consumption	<3W
Net Weight	<0.2kg

Panel lights and Introduction

Pilot	Status	Description
POWER	On	The device is powered up.
POWER	Off	The device is powered down.
LOS	Blink	The device doses not receive optical signals.
LOS	Off	The device has received optical signal.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LAN	On	Port is connected properly (LINK).
	Blink	Port is sending or/and receiving data (ACT).
	Off	Port connection exception or not connected.

Ordering information

Product Name	Product Model	Descriptions
1GE XPON	OP151	1*10/100/1000Mbps auto adaptive Ethernet（RJ45） ,GPON interface, Plastic Casing, External power supply adapter

Product name�?nbsp;	*
name�?nbsp;	*
mobile�?nbsp;
tel�?nbsp;
Country�?nbsp;
Email�?nbsp;	*
Address�?nbsp;
Content�?nbsp;	*